推薦：Flash Action實現小球沿不規則的路徑上移動
用了BitmapData.getPixel();來做的.原理:路徑為一像素的純色的不規則的曲線(如紅色),用getPixel();記錄曲線上的所有坐標.importflash.display.BitmapData;im

先發效果，效果有參考一下國外的餅圖，不過他的代碼，注釋等我也看不懂，英文不懂，所以我就寫個中文的好了。大家完全可以根據我的代碼改出更多的效果來。
編程水平有限，大家諒解一下，不過能正常運行。
http://www.blueidea.com/articleimg/2007/03/4540/ok.swf

數據來源于xml配置文件，可以直接修改xml文件以達到直接使用的目的。默認數據來源為piedata.xml但是可以在頁面中修改這個數據來源。如下：
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0" width="600" height="600">
<param name="movie" value="ok.swf?piedata=piedata.asp" />
<param name="quality" value="high" />
<embed src="ok.swf?piedata=piedata.asp" quality="high" pluginspage="http://www.macromedia.com/go/getflashplayer" type="application/x-shockwave-flash" width="600" height="600"></embed>
</object>

在代碼中swf文件名后加上參數?piedata=piedata.asp則可以修改數據來源為piedata.asp。

其實原理也不難，先畫個圓（扇形）做上表面，然后分別畫出兩個側面和一個曲面，最后畫底下的圓（扇形）。一個立體的小扇形就出來了。讓他們一起拼在一起就成了餅圖嘛。只有一點比較煩就是確定每一個扇形的深度，好讓他們在視學上看起來處于正常的前后關系位置。在這兒，我想了一個法子。
先算出當前扇形的中間度數，看這個度數是否在水平線以下，是的話就看這個度數與垂直方向的角度，角度最小的在最前面，最大的在最后面，假如中間度數在水平線以上，那么則與中間度數在水平線以下的相反。這兒要注重的是必須要從正上方作為0度，開始計算。

下面是源文件，所有代碼放到影片的時間軸上的一幀中就可以了。

代碼拷貝框
//縮放舞臺并不縮放內容，將內容定位于舞臺的左上角; Stage.align = "TL"; Stage.scaleMode = "noScale"; _quality = "BEST"; import mx.transitions.Tween; import mx.transitions.easing.*; //全局 //所有數據 var pie_num:String = "20,15,8,50,55,100,100,190"; //所有數據名稱 var pie_name:String = "四川,重慶,云南,貴州,山西,湖南,上海,北京,廣州"; //是否顯示數據名稱與百分比值 var show_name:String = "true,false,false,true,false,true,true,true" //所有顏色 var colorstr:String = "0xFF0F00,0xFF6600,0xFF9E01,0xFCD202,0xF8FF01,0xB0DE09,0x04D215,0x0D8ECF,0xFF1F11"; //所有開始位置 var defaultsate:String = "false,false,false,false,false,false,false,true"; //公共變量 x0 = 210;//圓點坐標x(數字) y0 = 135;//圓點坐標y(數字) z = 150;//圓長軸(>0) d = 90;//圓短軸(>0) w = 150;//環寬(>0,<長軸) h = 20;//餅高(>=0) movew = 15;//移動距離(>0) alpha = 100;//點擊之后的透明度(0-100) mcalpha = 100;//默認所有開始透明度(0-100) showorder = true;//是否顯示豎向排列表(true,false) orderx = 400;//豎向排列表起始x(數字) ordery = 70;//豎向排列表起始y(數字) orderxy = 6;//豎向排列表豎向間隔(>0) linecolor = 0xcccccc;//指示線顏色(十六進制顏色) linealpha = 100;//指示線透明度(0-100) titleline = 20; //指示線長度(>0 || 0<) fontcolor = 0xFF0000;//文字顏色(十六進制顏色) percentshow = "font";//是否顯示百分值四個值（font文字,num百分值,all都顯示,none不顯） orderfontcolor = 0x222222;//左邊豎向排列文字顏色(十六進制顏色) dark = 1.43;//深色系數（>1如1.43默認） //以下為三個餅圖示例 //第一個參數為影片名，第二個為深度群 drawpie("amu",1, pie_num,pie_name,titleline,linecolor,linealpha,orderfontcolor,percentshow,fontcolor,colorstr,defaultsate,show_name, x0,y0,z,d,w,h,movew,alpha,mcalpha,dark, showorder,orderx,ordery,orderxy); drawpie("vapr",2, "15,30,60,90","<b>好</b>,不好,一般,差,太差了",0,0xcccccc, 0,0x000000,"all",0x666666,"0x0D8ECF,0x04D215,0xB0DE09,0xF8FF01,0xFF9E01,0xFF6600,0xFF1F11","true,true,false,false","true,true,true,false", 160,380,70,70,50,2,15,100,100,1.5, true,20,340,13); drawpie("kiss",3, "30,50,290,70,50,10","Flash,Html,Javascript,Asp,PHP,C#",10,0x999999,100,0x000000,"none",0xff6600,"0x0D8ECF,0x04D215,0xB0DE09,0xF8FF01,0xFF9E01,0xFF6600,0xFF1F11","false,false,false,false,false,false,false","false,false,false,false,false,false,false", 470,300,100,60,60,20,15,50,100,1.15, false,280,250,28); drawpie("kisss",4, "242,332,171,116,106,224","Flash,Html,Javascript,Asp,PHP,C#",10,0x999999,100,0x000000,"all",0xff6600,"0x0D8ECF,0x04D215,0xB0DE09,0xF8FF01,0xFF9E01,0xFF6600,0xFF1F11","false,false,false,false,false,false,false","true,true,true,true,true,true,true", 370,520,60,40,40,10,15,50,100,1.15, true,515,480,3); function drawpie(mcname:String, depth:Number, pie_num:String, pie_name:String, titleline:Number, linecolor:Number,linealpha:Number, orderfontcolor:Number,percentshow:String, fontcolor:Number, colorstr:String, defaultsate:String, show_name:String, x0:Number, y0:Number, z:Number, d:Number, w:Number, h:Number, movew:Number, alpha:Number, mcalpha:Number, dark:Number, showorder:Boolean, orderx:Number, ordery:Number, orderxy:Number):Void{ arr_n = pie_num.split(","); arr_total=0; for(m=0;m<arr_n.length;m ){ arr_total =Number(arr_n[m]); } var arr_name = new Array(); arr_name = pie_name.split(","); var arr_showname = new Array(); arr_showname = show_name.split(","); var arr_num = new Array(); var arr_percent = new Array(); duof = 0; for(m=0;m<arr_n.length;m ){ if(m==arr_n.length-1){ duo = 360-duof; arr_num[m]= duo.toString(); }else{ duo = Math.round((Number(arr_n[m])*360)/arr_total); duof = duof duo; arr_num[m]= duo.toString(); } arr_percent[m] = Math.round((Number(arr_n[m])*100)/arr_total*100)/100; } //分割數據 var arr_color = colorstr.split(","); var arr_defaultstate = defaultsate.split(","); //所有扇環的中間度 var arr_middle:Array = new Array(); //生成所有的扇環的中間度，用來確定深度 var xx:Number=-90; var arr_a:Array = new Array();//記錄每一扇環的開始度與結束度 for(m=0; m<arr_num.length;m ){ a0=xx; a=Number(a0) Number(arr_num[m]); arr_a.push([a0,a]); xx=a; if(a-a0>180){ arr_middle[m] = 0.001; }else{ if((a-a0)/2 a0<=180 && (a-a0)/2 a0>=0){ //本mc的中間角度與90度的差值（這兒我們確定誰與90度差值的絕對值最小就排在最前面） arr_middle[m] = Math.abs(90-((a-a0)/2 a0)); }else if((a-a0)/2 a0>180 && (a-a0)/2 a0<=270){ arr_middle[m] = (Math.abs((a-a0)/2 a0-180) 500); //本mc的中間角度與180度的差值（這兒我們確定誰與90度差值的絕對值最大就排在最前面） }else if((a-a0)/2 a0>=-90 && (a-a0)/2 a0<0){ arr_middle[m] = (Math.abs((a-a0)/2 a0-360) 500); //本mc的中間角度與270度的差值（這兒我們確定誰與90度差值的絕對值最大就排在最前面） } } //trace(m ":" arr_middle[m]); } //trace(arr_a[0][0]); //扇環排序 arr_middle = arr_middle.sort(Array.NUMERIC|Array.RETURNINDEXEDARRAY);//重排序，讓原來的數組值從小到大排列，但數組的索引不變。 //arr_middle.reverse(); // for(m = 0; m<arr_middle.length; m ){ //繪出豎向方塊鏈接------------------------------------------------------------------------ if(showorder){ _root.createEmptyMovieClip(mcname arr_middle[m] "icon_mc",(5-m)*22 depth*10 1); mc = this[mcname arr_middle[m] "icon_mc"]; color = parseInt(arr_color[arr_middle[m]]); beginx = orderx; beginy = ordery; jianxy = orderxy 12; mc.beginFill(color, 100); mc.lineStyle(1, darkcolor(color,dark), 100, true, "none"); mc.moveTo(beginx,arr_middle[m]*jianxy beginy); mc.lineTo(beginx 12,arr_middle[m]*jianxy beginy); mc.lineTo(beginx 12,arr_middle[m]*jianxy beginy 12); mc.lineTo(beginx,arr_middle[m]*jianxy beginy 12); mc.endFill(); var label:TextField = mc.createTextField("label", 1, beginx 16, arr_middle[m]*jianxy beginy-3, 0, 0); label.html = true; label.autoSize = "left"; label.htmlText = arr_name[arr_middle[m]]; var myformat:TextFormat = new TextFormat(); myformat.font = "Verdana"; myformat.size = 12; myformat.color = orderfontcolor; label.setTextFormat(myformat); } //--------------------------------------------------------------------- _root.createEmptyMovieClip(mcname arr_middle[m] "_mc",(5-m)*22 depth*10); //當前m應算為arr_middle[m]; drawCircle(this[mcname arr_middle[m] "_mc"], x0, y0, z, d, arr_a[arr_middle[m]][0], arr_a[arr_middle[m]][1], h, w, parseInt(arr_color[arr_middle[m]]), movew,alpha,mcalpha,arr_defaultstate[arr_middle[m]], arr_percent[arr_middle[m]],arr_name[arr_middle[m]],arr_showname[arr_middle[m]], titleline,linecolor,linealpha,fontcolor,percentshow,dark, this[mcname arr_middle[m] "icon_mc"]); this[mcname arr_middle[m] "_mc"]._alpha=mcalpha; //--------------------------------------------------------------------- //讓點擊豎向排列時的效果和點擊pie時一樣。 if(showorder){ mc.onRelease = this[mcname arr_middle[m] "_mc"].onRelease; } } } /* mc為影片名。 x0，y0圓心坐標；w1，w2為長短軸；a0為開始度數，a為結束度數，h為高, hw為環寬，color為十六進制顏色, movew為移動距離,alpha為透明度（點擊之后），mcalpha為原始透明度,movenow為確定默認載入時是否移動出去， valuepercent為百分比值，arr_name為每項名稱，arr_showname確定是否顯示名稱與值， titleline顯示名稱與值的長短位置，linecolor指示線顏色,linealpha指示線透明度，fontcolor文字顏色，percentshow是否顯示百分比值，dark深色系數(>1如1.43) 本pie對應豎向排列方塊mc名。 */ function drawCircle(mc:MovieClip, x0:Number, y0:Number, w1:Number, w2:Number, a0:Number, a:Number, h:Number, hw:Number, color:Number, movew:Number, alpha:Number, mcalpha:Number, movenow:String, valuepercent:Number, arr_name:String, arr_showname:String, titleline:Number, linecolor:Number,linealpha:Number, fontcolor:Number,percentshow:String,dark:Number, ordermc:MovieClip):Void { //加減間隔度 step = 1; //求內長短軸 leichang = w1-hw; leiduan = w2-(hw*w2/w1); //深色 hicolor = darkcolor(color,dark); //--------------------------------- //下面為下面環; mc.beginFill(color, 100); //mc.lineStyle(1, color, 100, false, "none"); //外邊 mc.moveTo(getPoint(x0, y0 h, w1, w2, a0).x, getPoint(x0, y0 h, w1, w2, a0).y); k = a0; while (k<a) { k = step; mc.lineTo(getPoint(x0, y0 h, w1, w2, k).x, getPoint(x0, y0 h, w1, w2, k).y); } //側邊1 mc.lineTo(getPoint(x0, y0 h, leichang, leiduan, k).x, getPoint(x0, y0 h, leichang, leiduan, k).y); //內邊 while (k>a0) { k -= step; mc.lineTo(getPoint(x0, y0 h, leichang, leiduan, k).x, getPoint(x0, y0 h, leichang, leiduan, k).y); } //側邊2 mc.lineTo(getPoint(x0, y0 h, leichang, leiduan, a0).x, getPoint(x0, y0 h, leichang, leiduan, a0).y); mc.endFill(); //-------------------------------- //下邊高 //下邊外側邊高 if(a0<=0 && a>=0 && a<=180){ //解決90度時外側面，顯示事實為90度，實際為0度，因為我們整個旋轉了-90度； mc.beginFill(hicolor, 100); mc.moveTo(getPoint(x0, y0 h, w1, w2, a0).x, getPoint(x0, y0 h, w1, w2, a0).y); k=a0; while (k<0) { k = step; mc.lineTo(getPoint(x0, y0 h, w1, w2, k).x, getPoint(x0, y0 h, w1, w2, k).y); } mc.lineTo(getPoint(x0, y0, w1, w2, 0).x, getPoint(x0, y0, w1, w2, 0).y); while (k>a0){ k -=step; mc.lineTo(getPoint(x0, y0, w1, w2, k).x, getPoint(x0, y0, w1, w2, k).y); } mc.endFill(); mc.beginFill(hicolor, 100); mc.moveTo(getPoint(x0, y0 h, w1, w2, 0).x, getPoint(x0, y0 h, w1, w2, 0).y); k=0; while (k<a) { k = step; mc.lineTo(getPoint(x0, y0 h, w1, w2, k).x, getPoint(x0, y0 h, w1, w2, k).y); } mc.lineTo(getPoint(x0, y0, w1, w2, a).x, getPoint(x0, y0, w1, w2, a).y); while (k>0){ k -=step; mc.lineTo(getPoint(x0, y0, w1, w2, k).x, getPoint(x0, y0, w1, w2, k).y); } mc.endFill(); }else if(a>=180 && a0<=180 && a0>=0){ //解決180度時外側面，顯示事實為270度，實際為180度，因為我們整個旋轉了-90度； mc.beginFill(hicolor, 100); mc.moveTo(getPoint(x0, y0 h, w1, w2, a0).x, getPoint(x0, y0 h, w1, w2, a0).y); k=a0; while (k<180) { k = step; mc.lineTo(getPoint(x0, y0 h, w1, w2, k).x, getPoint(x0, y0 h, w1, w2, k).y); } mc.lineTo(getPoint(x0, y0, w1, w2, 180).x, getPoint(x0, y0, w1, w2, 180).y); while (k>a0){ k -=step; mc.lineTo(getPoint(x0, y0, w1, w2, k).x, getPoint(x0, y0, w1, w2, k).y); } mc.endFill(); mc.beginFill(hicolor, 100); mc.moveTo(getPoint(x0, y0 h, w1, w2, 180).x, getPoint(x0, y0 h, w1, w2, 180).y); k=180; while (k<a) { k = step; mc.lineTo(getPoint(x0, y0 h, w1, w2, k).x, getPoint(x0, y0 h, w1, w2, k).y); } mc.lineTo(getPoint(x0, y0, w1, w2, a).x, getPoint(x0, y0, w1, w2, a).y); while (k>180){ k -=step; mc.lineTo(getPoint(x0, y0, w1, w2, k).x, getPoint(x0, y0, w1, w2, k).y); } mc.endFill(); }else if(a0<=0 && a>=180){ //解決同時處于0度和180度的情況 mc.beginFill(hicolor, 100); mc.moveTo(getPoint(x0, y0 h, w1, w2, a0).x, getPoint(x0, y0 h, w1, w2, a0).y); k=a0; while (k<0) { k = step; mc.lineTo(getPoint(x0, y0 h, w1, w2, k).x, getPoint(x0, y0 h, w1, w2, k).y); } mc.lineTo(getPoint(x0, y0, w1, w2, 0).x, getPoint(x0, y0, w1, w2, 0).y); while (k>a0){ k -=step; mc.lineTo(getPoint(x0, y0, w1, w2, k).x, getPoint(x0, y0, w1, w2, k).y); } mc.endFill(); mc.beginFill(hicolor, 100); mc.moveTo(getPoint(x0, y0 h, w1, w2, 0).x, getPoint(x0, y0 h, w1, w2, 0).y); k=0; while (k<180) { k = step; mc.lineTo(getPoint(x0, y0 h, w1, w2, k).x, getPoint(x0, y0 h, w1, w2, k).y); } mc.lineTo(getPoint(x0, y0, w1, w2, 180).x, getPoint(x0, y0, w1, w2, 180).y); while (k>0){ k -=step; mc.lineTo(getPoint(x0, y0, w1, w2, k).x, getPoint(x0, y0, w1, w2, k).y); } mc.endFill(); mc.beginFill(hicolor, 100); mc.moveTo(getPoint(x0, y0 h, w1, w2, 180).x, getPoint(x0, y0 h, w1, w2, 180).y); k=180; while (k<a) { k = step; mc.lineTo(getPoint(x0, y0 h, w1, w2, k).x, getPoint(x0, y0 h, w1, w2, k).y); } mc.lineTo(getPoint(x0, y0, w1, w2, a).x, getPoint(x0, y0, w1, w2, a).y); while (k>180){ k -=step; mc.lineTo(getPoint(x0, y0, w1, w2, k).x, getPoint(x0, y0, w1, w2, k).y); } mc.endFill(); }else{ mc.beginFill(hicolor, 100); mc.moveTo(getPoint(x0, y0 h, w1, w2, a0).x, getPoint(x0, y0 h, w1, w2, a0).y); k = a0; while (k<a) { k = step; mc.lineTo(getPoint(x0, y0 h, w1, w2, k).x, getPoint(x0, y0 h, w1, w2, k).y); } //mc.lineTo(getPoint(x0, y0 h, w1, w2, a).x, getPoint(x0, y0 h, w1, w2, a).y); mc.lineTo(getPoint(x0, y0, w1, w2, k).x, getPoint(x0, y0, w1, w2, k).y); while (k>a0) { k -= step; mc.lineTo(getPoint(x0, y0, w1, w2, k).x, getPoint(x0, y0, w1, w2, k).y); } mc.endFill(); } //下邊開始側面高 mc.beginFill(hicolor, 100); //mc.lineStyle(1, hicolor, 100, false, "none"); mc.moveTo(getPoint(x0, y0 h, w1, w2, a0).x, getPoint(x0, y0 h, w1, w2, a0).y); mc.lineTo(getPoint(x0, y0 h, leichang, leiduan, a0).x, getPoint(x0, y0 h, leichang, leiduan, a0).y); mc.lineTo(getPoint(x0, y0, leichang, leiduan, a0).x, getPoint(x0, y0, leichang, leiduan, a0).y); mc.lineTo(getPoint(x0, y0, w1, w2, a0).x, getPoint(x0, y0, w1, w2, a0).y); mc.endFill(); //下面結束側面高 mc.beginFill(hicolor, 100); //mc.lineStyle(1, hicolor, 100, false, "none"); mc.moveTo(getPoint(x0, y0 h, w1, w2, a).x, getPoint(x0, y0 h, w1, w2, a).y); mc.lineTo(getPoint(x0, y0 h, leichang, leiduan, a).x, getPoint(x0, y0 h, leichang, leiduan, a).y); mc.lineTo(getPoint(x0, y0, leichang, leiduan, a).x, getPoint(x0, y0, leichang, leiduan, a).y); mc.lineTo(getPoint(x0, y0, w1, w2, a).x, getPoint(x0, y0, w1, w2, a).y); mc.endFill(); //下面內側面高 mc.beginFill(hicolor, 100); //mc.lineStyle(1, hicolor, 100, false, "none"); mc.moveTo(getPoint(x0, y0 h, leichang, leiduan, a0).x, getPoint(x0, y0 h, leichang, leiduan, a0).y); k = a0; while (k<a) { k = step; mc.lineTo(getPoint(x0, y0 h, leichang, leiduan, k).x, getPoint(x0, y0 h, leichang, leiduan, k).y); } mc.lineTo(getPoint(x0, y0, leichang, leiduan, k).x, getPoint(x0, y0, leichang, leiduan, k).y); while (k>a0) { k -= step; mc.lineTo(getPoint(x0, y0, leichang, leiduan, k).x, getPoint(x0, y0, leichang, leiduan, k).y); } mc.endFill(); //--------------------------------- //下面為上面環; mc.beginFill(color, 100); //mc.lineStyle(1, color, 100, false, "none"); //外邊 mc.moveTo(getPoint(x0, y0, w1, w2, a0).x, getPoint(x0, y0, w1, w2, a0).y); k = a0; while (k<a) { k = step; mc.lineTo(getPoint(x0, y0, w1, w2, k).x, getPoint(x0, y0, w1, w2, k).y); } //側邊1 mc.lineTo(getPoint(x0, y0, leichang, leiduan, k).x, getPoint(x0, y0, leichang, leiduan, k).y); //內邊 while (k>a0) { k -= step; mc.lineTo(getPoint(x0, y0, leichang, leiduan, k).x, getPoint(x0, y0, leichang, leiduan, k).y); } //側邊2 mc.lineTo(getPoint(x0, y0, leichang, leiduan, a0).x, getPoint(x0, y0, leichang, leiduan, a0).y); mc.endFill(); //--------------------------------------顯示名稱與值 if(arr_showname=="true"){ mc.beginFill(color, 100); mc.lineStyle(1, linecolor, linealpha); mc.moveTo(getPoint(x0, y0, w1, w2, a0 (a-a0)/2).x,getPoint(x0, y0, w1, w2, a0 (a-a0)/2).y); mc.lineTo(getPoint(x0, y0, w1 titleline, w2 (w2*titleline)/w1, a0 (a-a0)/2).x,getPoint(x0, y0, w1 titleline, w2 (w2*titleline)/w1, a0 (a-a0)/2).y); mc.endFill(); //trace(mc._name ":" (a0 (a-a0)/2)); if(a0 (a-a0)/2>0 && a0 (a-a0)/2<90){ var label:TextField = mc.createTextField("label", 1, getPoint(x0, y0, w1 titleline, w2 (w2*titleline)/w1, a0 (a-a0)/2).x, getPoint(x0, y0, w1 titleline, w2 (w2*titleline)/w1, a0 (a-a0)/2).y, 0, 0); label.autoSize = "left"; }else if(a0 (a-a0)/2>90 && a0 (a-a0)/2<180){ var label:TextField = mc.createTextField("label", 1, getPoint(x0, y0, w1 titleline, w2 (w2*titleline)/w1, a0 (a-a0)/2).x, getPoint(x0, y0, w1 titleline, w2 (w2*titleline)/w1, a0 (a-a0)/2).y, 0, 0); label.autoSize = "right"; }else if(a0 (a-a0)/2>180 && a0 (a-a0)/2<270){ var label:TextField = mc.createTextField("label", 1, getPoint(x0, y0, w1 titleline, w2 (w2*titleline)/w1, a0 (a-a0)/2).x, getPoint(x0, y0, w1 titleline, w2 (w2*titleline)/w1, a0 (a-a0)/2).y-18, 0, 0); label.autoSize = "right"; }else if(a0 (a-a0)/2>-90 && a0 (a-a0)/2<0){ var label:TextField = mc.createTextField("label", 1, getPoint(x0, y0, w1 titleline, w2 (w2*titleline)/w1, a0 (a-a0)/2).x, getPoint(x0, y0, w1 titleline, w2 (w2*titleline)/w1, a0 (a-a0)/2).y-18, 0, 0); label.autoSize = "left"; }else if(a0 (a-a0)/2==0){ var label:TextField = mc.createTextField("label", 1, getPoint(x0, y0, w1 titleline, w2 (w2*titleline)/w1, a0 (a-a0)/2).x, getPoint(x0, y0, w1 titleline, w2 (w2*titleline)/w1, a0 (a-a0)/2).y-9, 0, 0); label.autoSize = "left"; }else if(a0 (a-a0)/2==90){ var label:TextField = mc.createTextField("label", 1, getPoint(x0, y0, w1 titleline, w2 (w2*titleline)/w1, a0 (a-a0)/2).x, getPoint(x0, y0, w1 titleline, w2 (w2*titleline)/w1, a0 (a-a0)/2).y, 0, 0); label.autoSize = "center"; }else if(a0 (a-a0)/2==180){ var label:TextField = mc.createTextField("label", 1, getPoint(x0, y0, w1 titleline, w2 (w2*titleline)/w1, a0 (a-a0)/2).x, getPoint(x0, y0, w1 titleline, w2 (w2*titleline)/w1, a0 (a-a0)/2).y-9, 0, 0); label.autoSize = "right"; } label.html = true; if(percentshow=="all"){ label.htmlText = arr_name "：" valuepercent "%"; }else if(percentshow=="font"){ label.htmlText = arr_name; }else if(percentshow=="num"){ label.htmlText = valuepercent "%"; } var myformat:TextFormat = new TextFormat(); myformat.font = "Verdana"; myformat.size = 12; myformat.color = fontcolor; label.setTextFormat(myformat); label.gridFitType = "pixel"; label.antiAliasType = "advanced"; label.sharpness = -400; } //-------------------------------------- //點擊移動 mc.onRelease = function(){ //移動方向：度數： go_a = a0 (a-a0)/2; //移動距離 go_w = movew; //trace(this._name); //trace(this.enabled); if(mc._x!=0 || mc._y!=0){ myTweeen3=new Tween(mc,"_x",Bounce.easeOut,mc._x,(mc._x - (getPoint(x0,y0,go_w,go_w,go_a).x-x0)),1.5,true); myTweeen4=new Tween(mc,"_y",Bounce.easeOut,mc._y,(mc._x - (getPoint(x0,y0,go_w,go_w,go_a).x-x0)),1.5,true); //透明度 myTweeenalpha2=new Tween(mc,"_alpha",Regular.easeOut,mc._alpha,mcalpha,1,true); var listener3:Object = new Object(); mc.enabled = false; ordermc.enabled = false;//豎向排列本pie對應的方塊mc listener3.onMotionFinished = function(){ mc.enabled = true; ordermc.enabled = true;//豎向排列本pie對應的方塊mc } myTweeen3.addListener(listener3); //mc._x = mc._x - (getPoint(x0,y0,go_w,go_w,go_a).x-x0); //mc._y = mc._y - (getPoint(x0,y0,go_w,go_w,go_a).y-y0); }else{ //到達新點 myTweeen1=new Tween(mc,"_x",Regular.easeOut,mc._x,(getPoint(x0,y0,go_w,go_w,go_a).x-x0),1,true); myTweeen2=new Tween(mc,"_y",Regular.easeOut,mc._y,(getPoint(x0,y0,go_w,go_w,go_a).y-y0),1,true); //透明度 myTweeenalpha=new Tween(mc,"_alpha",Regular.easeOut,mc._alpha,alpha,1,true); var listener1:Object = new Object(); mc.enabled = false; ordermc.enabled = false;//豎向排列本pie對應的方塊mc listener1.onMotionFinished = function(){ mc.enabled = true; ordermc.enabled = true;//豎向排列本pie對應的方塊mc } myTweeen1.addListener(listener1); } //trace(this.getDepth()); } //默認位置（移動） if(movenow=="true"){ //移動方向：度數： go_a = a0 (a-a0)/2; //移動距離 go_w = movew; myTweeen5=new Tween(mc,"_x",Regular.easeOut,mc._x,(getPoint(x0,y0,go_w,go_w,go_a).x-x0),1,true); myTweeen6=new Tween(mc,"_y",Regular.easeOut,mc._y,(getPoint(x0,y0,go_w,go_w,go_a).y-y0),1,true); //透明度 myTweeenalpha=new Tween(mc,"_alpha",Regular.easeOut,mc._alpha,alpha,1,true); var listener5:Object = new Object(); mc.enabled = false; ordermc.enabled = false;//豎向排列本pie對應的方塊mc listener5.onMotionFinished = function(){ mc.enabled = true; ordermc.enabled = true;//豎向排列本pie對應的方塊mc } myTweeen5.addListener(listener5); } } /*-------------------------------------------------------------------------------------------- x=a*cosX //x、y是橢圓上一點的坐標；a、b分別是長、短軸 y=b*sinX //X是橢圓旋轉的角度。 計算橢圓上點的位置函數，x0，y0為圓心；w，h為長短軸；a為度數。返回一個坐標對象，有x和y兩個屬性。 */ function getPoint(x0:Number, y0:Number, w:Number, h:Number, a:Number):Object { a = a*Math.PI/180; return {x:Math.cos(a)*w x0, y:Math.sin(a)*h y0}; } //-------------------------------------------------------------------------------------- /*-------------------------------------------------------------------------------------------- 將顏色加深 原有顏色oldcolor為十六進表示法如：0xff6600;返回同樣類型的值 */ function darkcolor(oldcolor:Number,dark:Number):Number{ //求暗色 if(oldcolor.toString(16).length<6){//防止這個十六進制數的第一位為0; r = parseInt("0x0" substring(oldcolor.toString(16), 0, 1)); g = parseInt("0x" substring(oldcolor.toString(16), 2, 2)); b = parseInt("0x" substring(oldcolor.toString(16), 4, 2)); }else{ r = parseInt("0x" substring(oldcolor.toString(16), 0, 2)); g = parseInt("0x" substring(oldcolor.toString(16), 3, 2)); b = parseInt("0x" substring(oldcolor.toString(16), 5, 2)); } //trace("原始rgb:" r ":" g ":" b); //dark = 1.43; r=Math.round(r/dark).toString(16); g=Math.round(g/dark).toString(16); b=Math.round(b/dark).toString(16); //trace("新rgb:" r ":" g ":" b); r.length==1 ? r="0" r:r; g.length==1 ? g="0" g:g; b.length==1 ? b="0" b:b; var hicolor:Number; hicolor = parseInt("0x" r.toString(16) "" g.toString(16) "" b.toString(16)); r = parseInt("0x" substring(hicolor.toString(16), 0, 2)); g = parseInt("0x" substring(hicolor.toString(16), 3, 2)); b = parseInt("0x" substring(hicolor.toString(16), 5, 2)); return hicolor; }
[Ctrl A 全部選擇 然后拷貝]

源文件打包下載點擊這里下載源文件

分享：使用Flash實現Bump Mapping的效果
1.下面先來簡單的介紹一下什么叫作BumpMapping。BumpMapping又叫做凹凸貼圖，在現在的圖形處理以及游戲當中非常流行（大家應該都玩過Halflife-2或者Doom吧